How to Erase Things from Photos So Nobody Notices

To erase things from a photo, brush over them in the Object Remover and press "Erase what I brushed": the tool fills the brushed area using the pixels around it. It gives the cleanest results on small or thin objects over smooth surroundings such as sky, walls, water and skin, so the real skill is choosing what to erase and how to brush it. This guide explains what fills well, what needs a different approach, and the brush habits that make a patch disappear.

How does the eraser fill the gap?

Removing an object leaves a hole, and something has to go in it. The general technique is called inpainting. This tool uses a fast, fill-from-the-edges method that runs instantly in your browser with no model to download:

  1. It starts at the edge of the area you brushed and works inward, one ring of pixels at a time.
  2. Each new pixel takes the average colour of its already-known neighbours, so the surrounding colours flow in from every side until they meet in the middle.
  3. A smoothing pass then blends those rings together so no contour lines remain.

This has one big consequence for how you use it. The fill continues the colours around the hole; it does not invent new structure such as a missing window, a face or the pattern of a brick wall. That is exactly what you want for a wire across the sky or a spot on a cheek, and it is why the size and surroundings of what you erase matter more than anything else.

What fills cleanly, and what needs care?

What you are erasing Typical result Tip
Power lines, cables, a bird in the sky Very clean Erase long lines in sections
Blemishes, dust spots, sensor specks Very clean One small dab per spot
Text or a date stamp on a plain area Clean Cover the letters plus a small margin
A distant person on sand, grass, a plaza or a lawn Good Include their shadow in the stroke
An object sitting across a boundary, such as the horizon Good when split Erase each side of the boundary separately
A large foreground person or car in a detailed scene A soft, smooth patch Crop it out instead, or choose a different frame

Brush technique that hides the patch

Pick a brush just wider than the object

The Selection Brush Size slider runs from 5 to 50 and is measured in screen pixels. The tool converts it to image pixels for you, so a brush that looks right on screen covers the same visible area whether your photo is 1,000 or 6,000 pixels wide. Choose a size slightly wider than the thing you are removing. A brush much larger than the object wastes good surrounding detail; one that is too small leaves a rim of the object behind, and that rim gets averaged into the fill as a dark or coloured smudge.

Cover the whole object, including shadow and reflection

Anything you leave unbrushed counts as "surroundings" and its colour flows into the fill. Paint a few pixels past the visible edge, and include the shadow on the ground, the reflection in water or glass, and any colour fringe around a bright object.

Split strokes at boundaries

Because the fill flows in from every side, a single stroke that covers both sky and building will blend sky blue and wall grey in the middle. Brush only the part over the sky, erase, then brush the part over the building and erase again. Each fill now draws from one surface only.

Work in short passes

Every erase builds on the previous one, so you can remove a long cable in three or four segments, or take a crowd apart one person at a time. Short passes keep each hole small, and small holes fill best. Your brushed area shows as a red overlay; it is never part of the saved file, which is always the clean image at full resolution.

Examples by scenario

1
Tourists at a landmark. People in the middle distance standing on paving, sand or grass erase well, especially once their shadows are included. For a person close to the camera who covers part of a statue or doorway, the fill cannot rebuild the architecture behind them. A tighter crop with the image cropper often solves it better.
2
Power lines across a sunset. This is the ideal case: a thin line over a smooth gradient. Use a small brush, follow the wire in segments, and erase after each segment. Where a wire crosses a tree or roofline, stop at that edge and treat the next stretch as its own pass.
3
Skin blemishes in a portrait. Set the brush close to the spot size and dab once. The fill takes the surrounding skin tone, so the spot simply disappears. Avoid brushing across the edge of a lip, eyebrow or eyelid, where two different tones would blend.
4
Text, dates and stickers. An orange date stamp in the corner of an old print, a sticker on a laptop lid or a sign on a plain wall all sit on fairly even backgrounds, so they fill cleanly. Text printed over a detailed area leaves a smooth patch where the detail was.
5
Dust spots in a sky. Dust on a camera sensor shows as soft grey circles in the same place on every shot. One click-sized dab each, and the sky is clean.

Finishing touches

Everything happens on your device, and the download is a full-resolution PNG. For a short numbered walkthrough of the buttons, see how to remove objects from photos.

Start erasing

Brush over the thing you want gone and let the surroundings fill it in.

Open the Object Remover